UC10.3ft β double foot model (spinning rod)Sold Out
Power version of β3.
As a blackfin seabass rod, it is made for the purpose of making fishing in bad weather easier.
Because it is a reinforced rod, it is equipped with an all-W foot guide as standard.
The cast power has been increased, and the top bend is less, making it strong against the wind.
Although there is an increase in the weight of the rod due to the double foot specification, it is possible to reach a load range that can not be endured with a single foot, so it is an all W foot specification.
The top power of 10.3ftβ itself is close to 98PRO-H and 10PRO, but minnow casting and operation are barely possible.
The condition is around True Round 115mm, HRTM135A, SPPSlim110 or above.
Of course, you can also cast poppers and pencil baits.
It can be used up to CC28, JD-P170, NASUP150, TBOSlim155, and SC180, so it is also useful as a beach patrol rod that does not limit fish species.
The matching reel is a Cardia 6000LT class reel.
PE2-3 specification.
The tip section has a K-guide and W-foot specification, which reduces cast troubles of the normal leader system.
If you use a taper leader, there will be less trouble.
As for the characteristics of the rod, the 10.3fβ has the same stickiness and hardness as the β3, making it a versatile fishing rod on the beach.
Length | 10ft3in |
---|---|
Weight | About 287g |
Sections | 2 piece |
Closing size | About 162cm |
Cast weight | MAX 90g |
Recommended reel size | Daiwa LT6000 |
Recommended fishing line | PE #2 ~ 3 |
Guide setting | Butt RVSG φ30 ~ Top φ10 all double foot guide |
Reel seat | DPS20 + lock nut (up lock) * Adopted a new seat with an assist nut |
Fore grip length | About 12cm |
Rear grip length | About 36cm (including spacer) |
Length from reel foot to top | About 273cm |
Length from reel foot to end | About 43.5cm |